Medical Syringes
Products and replacement parts for use with medical syringes; includes syringe caps, tubing, cleaning products, and replacement parts such as needles, barrels, and plungers.
Medical syringes are used for drawing up and expelling liquids or suspensions. They are designed to fit appropriate needles, tubing, syringe filters, or similar devices, and are constructed of plastic, glass, or a combination of both. They may also have metal components.
General-purpose syringes comprise a barrel, a plunger, and a terminal fitting for needles or other attachments. Two-part syringes have an integral barrel and terminal fitting, with a separate plunger. Three-part syringes have a plunger fitted with a separate rubber piston at the end. Plastic medical syringes are made from polypropylene or polyethylene and are often single-use and disposable. Syringes with glass barrels frequently have metal plungers and terminal fittings, so tend to offer better overall chemical resistance and durability.
Barrels are normally graduated and transparent so that the contents are clearly visible. Syringe capacities may range from 1 mL up to 50 mL or more. Syringe fittings may be ‘Luer slip’, in which case they have simple ‘push-on’ terminals that hold needles in place just by friction, or ‘Luer-lock’, which twist and lock needles in place for a more secure fit. Luer fittings can be concentric (central to the barrel) or offset (acentric or eccentric).
Applications of Medical Syringes:
• General liquid sampling, transfer, or aspiration
• Clinical injection or sampling of blood or other fluids
Alzet ALZETTM Brain Infusion Kit 3, Materials for Brain Infusion from any ALZET Osmotic Pump, Low Profile, Wide Base Cannulae (30 ga) Extend 1-3 mm Below Skull Surface
ALZETTM Brain Infusion Kits are designed specifically for use with ALZET pumps for targeted delivery to the central nervous system, such as for infusion into the cerebral ventricles for wider distribution or direct microperfusion of discrete brain structures. ALZET Brain Infusion Kit 3 is optimized to reach the mouse lateral ventricles or other structures of similar depth. The cannulae are a low profile, wider design for stability and extend 1-3 mm from the skull surface.Each ALZET Brain Infusion Kit 3 includes materials for 10 brain infusions:•10 Brain Infusion Cannulae (low profile, wide pedestal, 30 gauge, extend 1-3 mm from skull surface)•10 Vinyl Catheter Tubes•40 Depth-Adjustment Spacers•1 Instruction SheetKit is sterilized by gamma irradiation and ready for use.
Andwin Scientific LUERLOCK SYRINGEW/O NEED/PK100
The Norm-Ject Syringe is made with all plastic, polypropylene. This product is suitable to use with sharp, tri-bevel needles. The syringes are certified for use with most common organic andinorganic chromatography solvents. This does not have any latex, BPA, styrene, DEHP, rubber or silicone that could pollute the chromatography or sensitive laboratory samples. It is sold in a pack of 100.
Med Vet International EasyTouch U-100 Insulin Syringes, 0.5ml, 27G x 0.5in, 100/Box
Color-Coded to Gauge Easy-to-read information on each side of the box Needles are made with Surgical Steel Triple-Bevel Cut for a Sharper Point Thin Wall Cannulas for an Easier Flow Electro-polished to Remove Burrs for a Smoother Injection Film Coated for Maximum Comfort
MARIAN MEDICAL INC Blood Administration Set W/Spike, 150 Micron Filter, 60Cc Syringe, 25 Per Box
Blood Administration Set With 150 Micron Filter For Neonatal Patient
Chemglass Life Sciences Syringe, Luer Lock, 30cc Capacity, 1cc Subdivisions
Syringe, Luer Lock, 30cc Capacity, 1cc Subdivisions. Borosilicate glass syringe has interchangeable barrels and plungers. Colored plunger ends identify the capacity of the syringe. Flanges are flat on two sides to prevent syringe from rolling. All sizes of syringes are equipped with a metal luer lock and permanently fused graduations. For needles see CG-3075.
Chemglass Life Sciences Needle, Syringe, Removable, 22s Gauge, .028in OD x .006in ID x 2.5in Long
Needle, Syringe, Removable, 22s Gauge,.028in OD x .006in ID x 2.5in Long. Needle for CG-3070 and CG-3074 syringes. All needles are made of #304 full hard stainless steel and have a 22¿ beveled point for septum penetration along with general use. Removable needles come complete with the PTFE ferrule necessary for assembly.
B BRAUN MED INC OEM SYRINGE 20ML LL ST 800/CS
B Braun 20 mL LL Syringe sterile 800/CS
** Please note that one of the following licenses is required in order to process an order:
¿Board of Pharmacy
¿Medical Director
¿Drug/Wholesale Distributor
ADMINMED NANOBIOSCIENCES 0600UM MICRONEEDLE ARRAY
AdminPatch Array 600 is a microneedle array, which has 187 (one hundred eighty seven) 500 um-tall microneedles located within 1 sq. cm circular area. The entire device is 20 mm in diameter and is made of medical-grade SS316L stainless steel.
Chemglass Life Sciences Syringe, Polypropylene, 20mL Capacity, Offset Tip
Syringe, Polypropylene, 20mL Capacity, Offset Tip. These all-polypropylene syringes are latex free and contain no rubber or silicone. The plastic plunger has a smooth draw and a positive safety stop to prevent accidental spills. Syringes are individually sterile strip packed. The Luer tip for the 20mL sizes have a Luer tip which is offset from the barrel.
Cole-Parmer BD Biocoat Disposable Syringe, Non-Sterile, Slip-Tip, Bulk Pack, 3 mL, 1600/Cs
Use these latex-free, disposable polypropylene syringes for your general-purpose applications. Available in either Luer-Lok or slip-tip versions. Syringes come nonsterilized in bulk packages and can be autoclaved. Needles and shield tips are not included; order separately.